Meiwha Mehrzweck-Wasserhahn mit Beschichtung
Produktvorteile:
1. Hochwertige Gewindebohrer aus Schnellarbeitsstahl mit Nitrierbeschichtung, stark verbesserte Oberflächenhärte, Abrieb- und Korrosionsbeständigkeit.
2. Spiralförmiger Gewindebohrer mit Spitze, schnelle Spanabfuhr nach unten und sanftes Gewindeschneiden für Durchgangslöcher, ideal zum Schneiden neuer Gewinde oder zum Reparieren beschädigter Gewinde.
3. Der Gewindebohrer-Satz kann mit Handgewindebohrern, Bohrmaschinen usw. verwendet werden.Gewindeschneidmaschinen, CNC- und Fräsmaschinen, praktisch für schnelles und präzises Gewindeschneiden.
4. Gewindeschneidwerkzeug, komplettes Bohren von Löchern, Gewindeschneiden, Entgraten und Senken auf verschiedenen Materialien wie Aluminiumlegierungsplatten, Kupferplatten, Eisen, Stahl usw.
Meiwha ISO-Spiralgewindebohrer:
| Kat.-Nr. | d1 | p(mm) | d2(mm) | SW | dk(mm) | l1 (mm) | l2 (mm) | l3 (mm) |
| M2*0,40 | M2 | 0,4 | 3 | 2.5 | 1.6 | 40 | 6 | 15 |
| M2,5*0,45 | M2.5 | 0,45 | 3 | 2.5 | 2,05 | 44 | 6 | 16 |
| M3*0,50 | M3 | 0,5 | 4 | 3.2 | 2.5 | 46 | 6 | 19 |
| M4*0,70 | M4 | 0,7 | 5 | 4 | 3.3 | 52 | 8.4 | 20 |
| M5*0,80 | M5 | 0,8 | 5.5 | 4.5 | 4.2 | 60 | 9.6 | 24 |
| M6*1,00 | M6 | 1 | 6 | 5 | 5 | 62 | 12 | 29 |
| M7*1,00 | M7 | 1 | 6.2 | 5 | 6 | 65 | 12 | 33 |
| M8*1,25 | M8 | 1,25 | 6.2 | 5.5 | 6.8 | 70 | 15 | 37 |
| M10*1,50 | M10 | 1,5 | 7 | 5.5 | 8,5 | 75 | 18 | 41 |
| M12*1,75 | M12 | 1,75 | 8,5 | 6.5 | 10.2 | 82 | 21 | 48 |
| M14*2.00 | M14 | 2 | 10.5 | 8 | 12 | 88 | 26 | 48 |
| M16*2.00 | M16 | 2 | 12,5 | 10 | 14 | 95 | 26 | 52 |
| M18*2,50 | M18 | 2.5 | 14 | 11 | 15,5 | 100 | 30 | 55 |
| M20*2,50 | M20 | 2.5 | 15 | 12 | 17,5 | 105 | 32 | 58 |
Meiwha JIS Spiralgewindebohrer:
| D1 | P(mm) | d1(mm) | SW | L1 (mm) | L2 (mm) | L3 (mm) | Nummer der Flöte | KLOPFEN Toleranz |
| M3 | 0,5 | 4.0 | 3.2 | 46 | 10,0 | 19 | 3 | 6H |
| M4 | 0,7 | 5,0 | 4.0 | 52 | 8.4 | 20 | 3 | 6H |
| M5 | 0,8 | 5.5 | 4.5 | 60 | 9.6 | 24 | 3 | 6H |
| M6 | 1.0 | 6,0 | 4.5 | 62 | 12,0 | 29 | 3 | 6H |
| M8 | 1.0 | 6.2 | 5,0 | 70 | 15,0 | 37 | 3 | 6HX |
| M8 | 1,25 | 6.2 | 5,0 | 70 | 15,0 | 37 | 3 | 6H |
| M10 | 1.0 | 7,0 | 5.5 | 75 | 18,0 | 41 | 3 | 6HX |
| M10 | 1,25 | 7,0 | 5.5 | 75 | 18,0 | 41 | 3 | 6HX |
| M10 | 1,5 | 7,0 | 5.5 | 75 | 18,0 | 41 | 3 | 6H |
| M12 | 1,25 | 8,5 | 6.5 | 82 | 18,0 | 48 | 3 | 6H |
| M12 | 1,5 | 8,5 | 6.5 | 82 | 18,0 | 48 | 3 | 6H |
| M12 | 1,75 | 8,5 | 6.5 | 82 | 18,0 | 48 | 3 | 6H |
| M14 | 1,5 | 10.5 | 8,0 | 88 | 20,0 | 48 | 3 | 6HX |
| M14 | 2.0 | 10.5 | 8,0 | 88 | 20,0 | 48 | 3 | 6HX |
| M16 | 1,5 | 12,5 | 10,0 | 95 | 20,0 | 52 | 3 | 6HX |
| M16 | 2.0 | 125 | 10,0 | 95 | 20,0 | 52 | 3 | 6HX |
| M18 | 1,5 | 14,0 | 11.0 | 100 | 25,0 | 55 | 4 | 6HX |
| M18 | 2.5 | 14,0 | 11.0 | 100 | 25,0 | 55 | 4 | 6HX |
| M20 | 1,5 | 15,0 | 12,0 | 105 | 25,0 | 58 | 4 | 6HX |
| M20 | 2.5 | 15,0 | 12,0 | 105 | 25,0 | 58 | 4 | 6HX |
| M24 | 3.0 | 19,0 | 15,0 | 120 | 30,0 | 66 | 4 | 6HX |
Meiwha DIN371 Spiralgewindebohrer:
| D1 | P(mm) | d1(mm) | SW | L1 (mm) | L2 (mm) | L3 (mm) | Nummer der Flöte | KLOPFEN Toleranz |
| M3 | 0,5 | 3.5 | 2.7 | 56 | 10,0 | 18 | 3 | 6H |
| M4 | 0,7 | 4.5 | 3.4 | 63 | 8.4 | 21 | 3 | 6H |
| M5 | 0,8 | 6,0 | 4.9 | 70 | 9.6 | 25 | 3 | 6H |
| M6 | 1.0 | 6,0 | 4.9 | 80 | 12,0 | 30 | 3 | 6H |
| M8 | 1.0 | 8,0 | 6.2 | 90 | 15,0 | 35 | 3 | 6HX |
| M8 | 1,25 | 8,0 | 6.2 | 90 | 15,0 | 35 | 3 | 6H |
| M10 | 1.0 | 10,0 | 8,0 | 100 | 18,0 | 39 | 3 | 6HX |
| M10 | 1,25 | 10,0 | 8,0 | 100 | 18,0 | 39 | 3 | 6HX |
| M10 | 1,5 | 10,0 | 8,0 | 100 | 18,0 | 39 | 3 | 6H |
Meiwha DIN376 Spiralgewindebohrer:
| D1 | P(mm) | d1(mm) | SW | L1 (mm) | L2 (mm) | L3 (mm) | Nummer der Flöte | KLOPFEN Toleranz |
| M12 | 1,25 | 9,0 | 7,0 | 110 | 18,0 | -- | 3 | 6H |
| M12 | 1,5 | 9,0 | 7,0 | 110 | 18,0 | -- | 3 | 6H |
| M12 | 1,75 | 9,0 | 7,0 | 110 | 18,0 | -- | 3 | 6H |
| M14 | 1,5 | 11.0 | 9,0 | 110 | 20,0 | -- | 3 | 6HX |
| M14 | 2.0 | 11.0 | 9,0 | 110 | 20,0 | -- | 3 | 6HX |
| M16 | 1,5 | 12,0 | 9,0 | 110 | 20,0 | -- | 3 | 6HX |
| M16 | 2.0 | 12,0 | 9,0 | 110 | 20,0 | -- | 3 | 6HX |
| M18 | 1,5 | 14,0 | 11.0 | 125 | 25,0 | -- | 4 | 6HX |
| M18 | 2.5 | 14,0 | 11.0 | 125 | 25,0 | -- | 4 | 6HX |
| M20 | 1,5 | 16,0 | 12,0 | 140 | 25,0 | -- | 4 | 6HX |
| M20 | 2.5 | 16,0 | 12,0 | 140 | 25,0 | -- | 4 | 6HX |
| M24 | 3.0 | 18,0 | 14,5 | 160 | 30,0 | -- | 4 | 6HX |
Meiwha JIS Gewindebohrer mit gerader Nut
| D1 | P(mm) | d1(mm) | SW | L1 (mm) | L2 (mm) | L3 (mm) | Nummer der Flöte | KLOPFEN Toleranz |
| M6 | 1.0 | 6,0 | 4.5 | 62 | 16,0 | 29 | 4 | 6HX |
| M8 | 1.0 | 6.2 | 5,0 | 70 | 21,0 | 37 | 4 | 6HX |
| M8 | 1,25 | 6.2 | 5,0 | 70 | 21,0 | 37 | 4 | 6HX |
| M10 | 1.0 | 7,0 | 5.5 | 75 | 23,0 | 41 | 4 | 6HX |
| M10 | 1,25 | 7,0 | 5.5 | 75 | 23,0 | 41 | 4 | 6HX |
| M10 | 1,5 | 7,0 | 5.5 | 75 | 23,0 | 41 | 4 | 6HX |
| M12 | 1,25 | 8,5 | 6.5 | 82 | 24,0 | 48 | 4 | 6HX |
| M12 | 1,5 | 8,5 | 6.5 | 82 | 24,0 | 48 | 4 | 6HX |
| M12 | 1,75 | 8,5 | 6.5 | 82 | 24,0 | 48 | 4 | 6HX |
| M14 | 1,5 | 10.5 | 8,0 | 88 | 24,0 | 48 | 4 | 6HX |
| M14 | 2.0 | 10.5 | 8,0 | 88 | 24,0 | 48 | 4 | 6HX |
| M16 | 1,5 | 12,5 | 10,0 | 95 | 24,0 | 52 | 4 | 6HX |
| M16 | 2.0 | 12,5 | 10,0 | 95 | 24,0 | 52 | 4 | 6HX |
| M18 | 1,5 | 14,0 | 11.0 | 100 | 24,0 | 55 | 4 | 6HX |
| M18 | 2.5 | 14,0 | 11.0 | 100 | 24,0 | 55 | 4 | 6HX |
| M20 | 1,5 | 15,0 | 12,0 | 105 | 26,0 | 58 | 4 | 6HX |
| M20 | 2.5 | 15,0 | 12,0 | 105 | 26,0 | 58 | 4 | 6HX |
Meiwha DIN371 Gewindebohrer mit gerader Nut
| D1 | P(mm) | d1(mm) | SW | L1 (mm) | L2 (mm) | L3 (mm) | Nummer der Flöte | KLOPFEN Toleranz |
| M3 | 0,5 | 3.5 | 2.7 | 56 | 10,0 | 18 | 3 | 6HX |
| M4 | 0,7 | 4.5 | 3.4 | 63 | 13,0 | 21 | 3 | 6HX |
| M5 | 0,8 | 6,0 | 4.9 | 70 | 16,0 | 25 | 3 | 6HX |
| M6 | 1.0 | 6,0 | 4.9 | 80 | 18,0 | 30 | 4 | 6HX |
| M8 | 1.0 | 8,0 | 6.2 | 90 | 20,0 | 35 | 4 | 6HX |
| M8 | 1,25 | 8,0 | 6.2 | 90 | 20,0 | 35 | 4 | 6HX |
| M10 | 1.0 | 10,0 | 8,0 | 100 | 20,0 | 39 | 4 | 6HX |
| M10 | 1,25 | 10,0 | 8,0 | 100 | 20,0 | 39 | 4 | 6HX |
| M10 | 1,5 | 10,0 | 8,0 | 100 | 20,0 | 39 | 4 | 6HX |
Meiwha DIN376 Gewindebohrer mit gerader Nut
| D1 | P(mm) | d1(mm) | SW | L1 (mm) | L2 (mm) | L3 (mm) | Nummer der Flöte | KLOPFEN Toleranz |
| M3 | 0,5 | 3.5 | 2.7 | 56 | 10,0 | 18 | 3 | 6HX |
| M4 | 0,7 | 4.5 | 3.4 | 63 | 13,0 | 21 | 3 | 6HX |
| M5 | 0,8 | 6,0 | 4.9 | 70 | 16,0 | 25 | 3 | 6HX |
| M6 | 1.0 | 6,0 | 4.9 | 80 | 18,0 | 30 | 4 | 6HX |
| M8 | 1.0 | 8,0 | 6.2 | 90 | 20,0 | 35 | 4 | 6HX |
| M8 | 1,25 | 8,0 | 6.2 | 90 | 20,0 | 35 | 4 | 6HX |
| M10 | 1.0 | 10,0 | 8,0 | 100 | 20,0 | 39 | 4 | 6HX |
| M10 | 1,25 | 10,0 | 8,0 | 100 | 20,0 | 39 | 4 | 6HX |
| M10 | 1,5 | 10,0 | 8,0 | 100 | 20,0 | 39 | 4 | 6HX |
Schreiben Sie hier Ihre Nachricht und senden Sie sie an uns
